Tally Generation Settings (Tally Enable Menu) - Sony DVS-9000 User Manual

Deleting wiring settings
1
In the Router/Tally >Wiring menu, using either of the following methods,
select the wiring whose settings you want to delete.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
2
Press [Delete].
This deletes the selected wiring entry.
Sorting wiring settings
In the Router/Tally >Wiring menu, press [Sort].
The sorting of wiring settings are executed in the following order.
Destination level order (ascending)tDestination address order
(ascending)tSource level order (ascending)

Tally Generation Settings (Tally Enable Menu)

For settings relating to tally generation, use the Router/Tally >Tally Enable
menu. The settings are common to the parallel and serial tallies.
To display the Tally Enable menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF4 'Tally
Enable.'
The status area shows the tally generation settings.
Making new tally generation settings
1
In the Router/Tally >Tally Enable menu, press [New].
The New menu appears.
2
Turn the knobs to set the following parameters.
Knob
1
2
3
a) 1:R1, 2:G1, 3:R2, 4:G2, 5:R3, 6:G3, 7:R4, 8:G4, 9:R5, 10:G5, 11:R6, 12:G6, 13:R7,
14:G7, 15:R8, and 16:G8. (R is an abbreviation of "Red Tally," and G of "Green Tally.")
Parameter
Destination Address
Destination Level
Tally Type
Adjustment
Destination address
Destination level
Tally type
Setup Relating to Router Interface and Tally
Setting values
1 to 1024
1 to 8
a)
1 to 16
423