Setup Relating To Dme; Settings Relating To Signal Inputs (Input Menu) - Sony DVS-9000 User Manual

Setup Relating to DME

Settings Relating to Signal Inputs (Input Menu)

To make settings relating to DME input signals, display the DME >Input
menu.
To display the Input menu
In the Engineering Setup menu, select VF4 'DME' and HF1 'Input.'
The status area shows the initial crop information and the DME system phase.
In the following description, the settings for DME1 are given by way of
example, but the settings for DME2 are carried out in a similar way.
Setting the initial crop
1
In the DME1 <Aspect> group of the DME >Input menu, select the screen
aspect ratio (16:9 or 4:3).
2
In the DME1 <Crop> group, press [Initial Crop] and adjust the following
parameters.
• If you selected 4:3 in step 1
Knob
1
2
3
4
• If you selected 16:9 in step 1
Knob
1
2
3
4
To return the parameter values to their default values
Parameter Adjustment
Top Position of top side
Left Position of left side
Right Position of right side
Bottom Position of bottom side
Parameter Adjustment
Top Position of top side
Left Position of left side
Right Position of right side
Bottom Position of bottom side
Setting values
–3.00 to +3.00
–4.00 to +4.00
–4.00 to +4.00
–3.00 to +3.00
Setting values
–9.00 to +9.00
–16.00 to
+16.00
–16.00 to
+16.00
–9.00 to +9.00
393

Setup Relating to DME