Sony DVS-9000 User Manual page 237

3
4
5
236
Snapshot Operations From the Numeric Keypad Control Block
Pressing one of the amber-lit buttons, while holding down [SNAPSHOT],
turns the button green to indicate its corresponding region as the new
reference region.
For details of the precedence order for becoming the reference region, see
"Regions and registers" in Chapter 1 (Volume 1).
The display shows the name of the reference region and the number of the
register previously recalled for that region.
Enter the desired register number from the numeric keypad.
See step 5 (page 234) in "Saving a snapshot from the numeric keypad
control block."
The entered register number appears in the display.
To apply temporary attributes, press the following buttons, turning them
on.
Control block Temporary
attribute to apply
Cross-point control A/B bus cross-point
block hold
Key cross-point hold [XPT HOLD] button in the key bus
Key disable
Numeric keypad Effect dissolve
control block
Auto transition
a) When Xpt Hold mode is selected in setup.
b) When Key Disable mode is selected in setup.
For the setup setting, see "Settings Relating to Keys, Wipes, Frame
Memory and Color Correction (Key/Wipe/FM/CCR Menu)" (page 373).
For details of temporary attributes and available attributes, see "Snapshot
Attributes" in Chapter 1 (Volume 1).
Notes
• The cross-point hold and key disable settings are maintained until you
next press the [XPT HOLD] button.
• Applying temporary attributes does not affect the contents of the
register.
• It is not possible to apply temporary attributes to a master snapshot.
Press the [ENTER] button.
Button
[XPT HOLD] button in the
background A/B bus
[XPT HOLD] button in the key bus
[+/–/EFF DISS] button
[CLR/AUTO TRANS] button
a)
b)