Sony DVS-9000 User Manual page 367

2
3
4
Making video process settings
1
2
3
4
366
Setup Relating to Switcher Processor
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Src No Input signal selection
The selected input signal appears in reverse video.
Press [Input Phase Adj].
To adjust the phase, adjust the following parameter.
Knob Parameter Adjustment
2 Phase Input signal phase
To enable through mode, press [Through Mode], turning it on.
In the Switcher >Input menu, press [Video Process].
The Video Process menu appears.
The status area shows the source number, source name, and video process
adjustment settings.
Using any of the following methods, select the input signal to which the
settings apply.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Src No Input signal selection
Press [Video Process], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Video Gain Video signal gain
2 Y Gain Y signal gain
3 C Gain Chrominance signal gain
4 Hue Delay Hue delay
Setting values
1 to 80
Setting values
–16 to +16
Setting values
1 to 80
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00