Auxiliary Bus Control Block Settings (Aux Assign Menu) - Sony DVS-9000 User Manual

Enabling the function to link the audio mixer
Note
For audio mixer operations in this system, it is necessary to set Mixer ESAM-
II for the DCU 9-pin serial port.
For details, see "Serial Port Settings (Serial Port Assign Menu)" (page 408).
1
In the Panel >Xpt Assign menu, using any of the following methods, select
the M/E bank or bus.
• Press directly on the list on the left of the status area.
• Press the arrow keys in the list on the left, to scroll the reverse video
cursor.
• Turn the knob.
2
Press [Audio Follow].
"Enable" appears in the Audio Follow column.
Setting the audio mixer cross-points
To assign an audio mixer cross-point to a switcher cross-point pair (video/key),
carry out the following procedure.
1
In the Panel >Xpt Assign menu, press [Mixer Xpt Assign].
The Mixer Xpt Assign menu appears.
2
In the list on the left, select the number for the setting.
3
In the list on the right, select the audio mixer cross-point (machine
number).
4
Press [Set].
The audio mixer number appears in the Mixer Xpt column.
Auxiliary Bus Control Block Settings (Aux Assign
Menu)
To carry out the settings of the AUX delegation buttons in the auxiliary bus
control block, use the Panel >Aux Assign menu.
Setup Relating to Operations From the Control Panel
329