In this state, you can adjust the pattern size and border softness with the
knobs.
(For details of the parameters, see the next item.)
To set the pattern size and position
1
In the Color Mix menu, press [Position/Size].
2
Set the following parameters.
The setting values of the parameters depend on the system aspect ratio (4:3
or 16:9), as follows.
Knob
1
2
3
4
5
a) For 4:3 mode
b) For 16:9 mode
To invert the regions of the two colors
In the Color Mix menu, press [Color Invert], turning it on.
Adjusting the color 1 and color 2
1
In the Color Mix menu, to adjust color 1 press [Color1], and to adjust color
2 press [Color2].
2
Set the following parameters.
Knob
1
2
3
Modifying the color combination pattern
See the following pages.
Parameter
Adjustment
H
Horizontal position
V
Vertical position
Size
Pattern size
Soft
Softness of the pattern
Pattern
Pattern number
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Setting values
–8.00 to +8.00
a)
–6.00 to +6.00
b)
–4.50 to +4.50
0.00 to 100.00
0.00 to 100.00
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
51