Sony DVS-9000 User Manual page 369

3
4
Selecting the output signal to which settings apply
In the following adjustment/setting operations except for "Setting the
reference output" (see page 370), use any of the following methods to select
the output signal before making the setting.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected output signal appears in reverse video.
Adjusting the video clip
To adjust the clip value for each of the output signals from the Output 1 to 48
ports, use the following procedure.
1
368
Setup Relating to Switcher Processor
[Aux Bus]: It is not possible to make duplicate assignments.
Preset
Edit Preview
AUX 1 to 48
Using any of the following methods, select the output port number and
signal to be assigned.
• Press directly on the list in the status area to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Output No Output port number
2 Source No Selection of signal to be assigned 1 and upwards
• For output ports not to be assigned, press [Inhibit].
The selected signal appears in reverse video.
Press [Set] to confirm the assignment.
Parameter Adjustment
Output No Output port number selection
In the Switcher >Output menu, press [Video Clip].
The Video Clip menu appears.
The status area shows the output ports and assigned signals, and the white
clip, dark clip, and chrominance clip values.
Setting values
1 to 48
Setting values
1 to 48