Error Messages Shown In The Error Information Menu - Sony DVS-9000 User Manual

a) MKS-8010A only

Error Messages Shown in the Error Information Menu

If a file transfer related error occurs, the Error Information menu appears to the
following error messages.
Error messages displayed when an error is detected by the
switcher processor
The following messages (except message a)) indicate data error; load or save
the data again. If the message still appears, contact your Sony service
representative.
Messages relating
to loading
PUT CLOSE (0x1)
PUT CLOSE (0x2)
PUT CLOSE (0x3)
PUT CLOSE (0x4)
PUT CLOSE (0x5)
PUT CLOSE (0x6)
PUT CLOSE (0x7)
PUT CLOSE (0x8)
PUT CLOSE (0x9)
PUT CLOSE (0xA)
PUT CLOSE (0xB)
PUT CLOSE (0xC)
a) This occurs if the User Region Config state is different for save and load. Make the User Region
Config the same as when the data was saved before carrying out a load operation.
Error messages when an error is detected displayed by the
control panel
When one of the following messages (except messages a) and b)) appears, load
or save the data again. If the message still appears, contact your Sony service
representative.
Message
ERROR: NOT SUPPORTED
ERROR: DESTINATION NG
Messages relating
to saving
GET OPEN (0x1)
GET OPEN (0x2)
GET OPEN (0x3)
GET OPEN (0x4)
GET OPEN (0x5)
GET OPEN (0x6)
GET OPEN (0x7)
GET OPEN (0x8)
GET OPEN (0x9)
GET OPEN (0xA)
a) a)
GET OPEN (0xB)
GET OPEN (0xC)
597
Error Messages