Serial Tally Settings (Serial Tally Menu) - Sony DVS-9000 User Manual

2

Serial Tally Settings (Serial Tally Menu)

To make serial tally settings, display the Router/Tally >Serial Tally menu.
To display the Serial Tally menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF7 'Serial
Tally.'
The serial tally settings appear in the status area.
Setting or changing the serial tally settings
1
2
3
Making the serial tally source address settings
To set the serial tally source address for each port, use the following procedure.
1
428
Setup Relating to Router Interface and Tally
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Slot No Parallel tally slot number
2 Port No Parallel tally port number
Press [Clear].
This deletes the selected parallel tally entry.
In the <Serial Tally Port> group of the Router/Tally >Serial Tally menu,
select the port to which the setting applies.
In the <Tally Goup> group, select the tally group.
In the <Tally Type> group, press the tally types to select. (You can select
up to four.)
Note
The selectable tally types depend on the settings in step 2.
In the Router/Tally >Serial Tally menu, press [Source Assign].
The Source Assign menu appears.
In the status area, the tally types and source address set for the serial tally
port appear.
Setting values
2 to 6
1 to 54