Sony DVS-9000 User Manual page 309

4
5
Note
Only regions assigned here can be used for keyframe or snapshot recall.
To set the region selection buttons selected when the [ALL] button
is pressed
1
2
Note
Assignment to the [ALL] button is region by region. Changing the assignment
of a region selection button does not change the regions assigned to the [ALL]
button.
To return the region assignment to the factory default state
In the Panel >Config >10 Key Region Assign menu, press [Default].
308
Setup Relating to Operations From the Control Panel
Knob Parameter
1 Button Assign Selection to which setting
Using any of the following methods, select the region to be assigned.
• Press directly on the list in the lower part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
lower part of the right side.
• Turn the knob.
Knob Parameter
2 Region
Press [Set], to confirm the selection.
This assigns the region to the region selection button in the numeric
keypad control block.
In the Panel >Config >10 Key Region Assign menu, press [All Select] in
the button area, or the [All Select] button indication in the status area,
setting it to On.
The [All Select] button indication in the status area changes to orange, and
the system switches to a mode for assigning region selection buttons to the
[ALL] button. In the factory default state, all buttons appear in reverse
video, and are assigned to the [ALL] button.
If you do not want to assign any region selection button to the [ALL]
button, press the corresponding button indication, setting it to Off.
The button you pressed returns to normal display.
Adjustment
applies
Adjustment
Region selection
Setting values
1 to 4
Setting values
1 and upwards