Sony DVS-9000 User Manual page 99

3
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameter.
Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
2
98
DME Special Effect Operations
Knob Parameter Adjustment
2 Curve Degree to which image stretches 0.00 to 100.00
3 Random Degree of jaggies at melted part
To make wave settings for melting part, press [Border] and set the
following parameters.
Knob Parameter Adjustment
1 Amp Amplitude of waves
2 Freq Frequency of waves
3 a) Amount of wave phase offset
Offset
4 b) Direction and speed of waves
Speed
5 Slant Slant of border
a) Set when Lock is on.
b) Set when Lock is off.
Parameter
Form
Press [Pixel], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Density Degree to which image
disappears
Adjustment
Waveform
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–16.000 to +16.000
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
1 to 8
Setting values
0.00 to 100.00