Sony DVS-9000 User Manual page 70

• 4:3 mode
Knob Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
a) This setting value is not supported on the MVE-8000A.
• 16:9 mode
Knob Parameter
1 H
2 V
3 Size
4 Soft
5 Pattern
a) This setting value is not supported on the MVE-8000A.
5
To invert the mask source, press [Invert], turning it on.
6
As required, set the modifiers for the mask pattern.
• When turning [Aspect] on and adjusting the pattern aspect ratio
Knob Parameter
1 Aspect
a) When a minus value is specified, the picture is extended in the vertical direction. When a
plus value is specified, the picture is extended in the horizontal direction.
• When turning [Angle] on in the <Rotation> group and slanting the
pattern
Knob Parameter
1 Angle
a) –1.00 is one rotation in counterclockwise direction. +1.00 is one rotation in clockwise
direction. 0.00 is no rotation.
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a specified speed
Knob Parameter
1 Speed
Adjustment
Horizontal position
Vertical position
Size of mask
Softness of mask
Pattern number
Adjustment
Horizontal position
Vertical position
Size of mask
Softness of mask
Pattern number
Adjustment
Aspect ratio
Adjustment
Rotation angle of pattern
Adjustment
Rotation speed of pattern
Setting values
–8.00 to +8.00
–6.00 to +6.00
0.00 to 100.00
0.00 to 100.00
a)
21, 24, 304
Setting values
–8.00 to +8.00
–4.50 to +4.50
0.00 to 100.00
0.00 to 100.00
a)
21, 24, 304
Setting values
–100.00 to +100.00
Setting values
a)
–8.00 to +8.00
Setting values
–100.00 to +100.00
DME Special Effect Operations
a)
a)
69