Sony DVS-9000 User Manual page 101

2
3
4
100
DME Special Effect Operations
The Lighting menu appears.
Press [Lighting], turning it on.
The Lighting effect is enabled.
In the <Light Pattern> group, select the lighting pattern Plane, Bar or
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
• When Plane is selected
Knob Parameter
1 Light
5 Total Ambient Brightness of whole image
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Note
The Total Ambient parameter is not supported on the MVE-8000A.
• When Bar is selected
Knob Parameter
1 Light
2 Ambient
5 Total Ambient Brightness of whole image
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Note
The Total Ambient parameter is not supported on the MVE-8000A.
• When Preset is selected
Knob Parameter
1 Light
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Intensity of light in ambient area 0.00 to 100.00
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values