Programming The Vps; Installing Kx-Tvm Maintenance Console - Panasonic KX-TVM50 Getting Started

4.1 Installing KX-TVM Maintenance Console

4 Programming the VPS

4.1 Installing KX-TVM Maintenance Console
System Requirements
Required Operating System
Microsoft Windows
®
Minimum Hardware Requirements for Windows 2000, Windows XP
CPU: 1.2 GHz Intel
HDD: 20 MB of available hard disk space
RAM: 256 MB of available RAM
Minimum Hardware Requirements for Windows Vista
CPU: 1.8 GHz Intel Pentium microprocessor
HDD: 40 MB of available hard disk space
RAM: 1 GB of available RAM
Password Security
To maintain system security, a password is required to perform system programming. We recommend
changing the default password the first time you access the VPS via KX-TVM Maintenance Console. The
default password can be changed by running the Quick Setup utility (see 4.3 Quick Setup) or by selecting
System Security®Administrator®Password.
Warning to the Administrator regarding the system password
1.
To avoid unauthorised access to VPS settings, which could result in fraudulent dialling, do not disclose the
password.
2.
Please inform the customer of the importance of the password and the possible dangers if it becomes
known to others.
3.
Please change the password periodically.
4.
To prevent unauthorised access, we strongly recommend selecting a long and random password.
5.
If the system password is forgotten, you have to reset the VPS to its factory defaults and reprogram it.
Note
•
A Programmer Code, if set, is required to start KX-TVM Maintenance Console. You can set or delete
the Programmer Code by selecting Utility®Programmer Code. If no code is set, the KX-TVM
Maintenance Console can be started and used, but a password is required to connect to the VPS and
change VPS settings.
Installing KX-TVM Maintenance Console
1.
2.
3.
4.
5.
6.
34 Getting Started
2000, Windows XP Professional Service Pack 2, or Windows Vista
®
Pentium microprocessor
® ®
Copy the KX-TVM Maintenance Console setup file to a local drive on the PC. (Its icon
is shown here, on the left.)
Double-click the setup file to run the installer.
Follow the on-screen instructions provided by the installation wizard.
Click Yes when prompted to copy the USB drivers, specify a location, then click OK.
Click OK after the drivers have been copied to the local drive.
Click Finish.
Business Edition
®
Document Version 2.1 2008/04