Starting Kx-Tvm Maintenance Console - Panasonic KX-TVM50 Getting Started

4.2 Starting KX-TVM Maintenance Console

4.2 Starting KX-TVM Maintenance Console
The instructions listed below explain how to start KX-TVM Maintenance Console. These instructions are for
when connecting to the VPS via USB.
Note
•
The screenshots shown here are for reference only, and may differ from the screens displayed on your
PC.
•
KX-TVM Maintenance Console uses English as the default language. See step 4 to change the
language.
1.
Click the KX-TVM Maintenance Console shortcut icon.
2.
Select the appropriate VPS model and click OK.
3.
The Set Default Parameters window is displayed the first time you start KX-TVM Maintenance Console.
Select the TVM Type, PBX Type, and Integration Mode. Change the default parameters listed in the window
if necessary, then click OK.
Note
•
If you have already used KX-TVM Maintenance Console to change the Programmer Code, the
Enter Programmer Code dialogue box is displayed. Enter the previously set Programmer Code,
then click OK.
36 Getting Started Document Version 2.1 2008/04