Mechanical Consideration - Huawei ADF10S48B Technical Manual

ADF10S48B
AC-DC Converter Technical Manual V1.1

Mechanical Consideration

Installation
Although the module can be mounted in any direction, free airflow must be available.
Soldering
The converter supports standard wave soldering and hand soldering. Reflow soldering is not allowed.
1. For wave soldering,
at most.
2. For hand soldering, the iron temperature should be maintained at 350°C to 420°C, and applied to the
module pins for less than 10 seconds.
The module can be rinsed using the isopropyl alcohol (IPA) solvent or other suitable solvents.
GLOBAL ENERGY EFFICIENCY SPECIALIST
the temperature on the module is specified to a maximum of 260°C for 7 seconds
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base Bantian Longgang
People's Republic of China
23
Shenzhen 518129
www.huawei.com