Scart connection
Philips Multimedia Projector
4. Installation
MULTIMEDIA
2
1
RGBS
Connect an optional Scart/RCA Component Video adapter (1) to the Scart connector of
1
your Component- or HDTV-video equipment.
Connect an optional VGA/RCA Component Video cable (2) to the Data socket of the
2
projector.
Connect the plugs at the other end of the cable to the appropriate output sockets of your
3
Component- or HDTV-video equipment (R,G, B, S).
If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
•
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (3).
–
Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
When RGBsog connection has been made:
Press Menu.
1
–
The menu bar appears on the screen.
The 'Picture' item is highlighted.
Use Cursor Control left to select 'Set up'.
2
Use Cursor Control down to select 'Auto Component Selection'.
3
Use Cursor Control right to select 'RGBsog'.
4
19
Connecting to video equipment
S-VIDEO
VIDEO
AUDIO-L
AUDIO-R
FILTER
3
Component/HDTV
equipment
Audio
out
R
L
DVD player, Settop Box,
HDTV receiver, etc.
English User guide bClever SV1
>