Functional Overview - Philips bClever SV1 User Manual

Menu 1
Error indicator 2
Volume –/+ 3
OK 4
A(udio)/V(ideo) Mute 5
Source 6
y Standby 7
Standby/Remote control
indicator
Source indicators 8
Picture size –/+ 9
Cursor Control 0
Philips Multimedia Projector

2. Functional overview

1 2 3 4
MENU OK
MENU OK
VOLUME +
VOLUME +
0
PICTURE SIZE – PICTURE SIZE – PICTURE SIZE + PICTURE SIZE +
9
VOLUME –
VOLUME –
8
DATA DATA S-VIDEO S-VIDEO VIDEO VIDEO
STANDBY STANDBY
SOURCE SOURCE AV MUTE AV MUTE
7 6 5
To activate and deactivate the menu.
– Lights up red in case of lamp error
– Fast blinks red in case of temperature error
To adjust the volume.
To confirm actions in the menu when the menu is on screen.
To mute the sound of the projector and to mute the picture.
To select the current projection source (Auto, Data, RGBsync,YPbPr or RGBsog, S-Video,Video).
The button toggles between the six signals.
When 'Auto' is selected the source with the highest priority will automatically be selected (Data,
RGBsync,YPbPr or RGBsog, S-Video,Video). When only one input source is connected, this will
automatically be selected.
To switch the projector in or out of the Power/Standby mode.
The indicator on the button:
– lights red when the projector is in Power/Standby mode;
– lights green when the projector is in operation mode;
– slowly blinks green when the projector is warming up;
– slowly blinks red when the projector is cooling down;
– fast blinks green/yellow for 1 second when the projector receives a signal from the remote
control in operation mode.
Indicate the currently active projection source (Data, S-Video,Video)
To reduce/enlarge the size of the projected picture.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
6
! @ #
English User guide bClever SV1
Controls
>