Preparing The Appliance - Silvercrest SMW 900 EDS B4 Operating Instructions Manual

Preparing the appliance

■ Remove the packaging material and the protective fi lms from the panel and
the door opener button 2.
CAUTION – PROPERTY DAMAGE!
■ Insert the plug into a mains power socket. Use a 230–240 V ~ , 50 Hz,
mains power socket with a 16 amp fuse. It is recommended that the micro-
wave oven is powered from its own power circuit. If you are unsure about
how to connect the microwave oven, consult a specialist.
■ Before the fi rst regular usage of the microwave oven the appliance must be
heated up to remove any remaining production residues.
■ After inserting the mains plug into the socket, open the microwave door once
by pressing the door opener button 2.
Switch the appliance on in Grill mode without any food or accessories (turntable 3
and grill stand t):
NOTE ON HEATING UP FOR THE FIRST TIME
Only operate the microwave without food or acces-
►
sories when heating up for the fi rst time.
Operate the microwave for a maximum of 5 minutes
when empty!
1) Press the Grill button 7
2) Turn the control dial r
on the display 1 and confi rm your choice by pressing the start/quick start
button r
3) Use the control dial r
4) Press start/quick start r
│
■ 100 GB
Do not remove the light grey mica cover plate, which
is mounted inside the cooking chamber to protect the
magnetron.
. "Gr 1" appears on the display 1.
, until "Gr 3" and the
.
to set a cooking time of 5 minutes.
to start the grilling process.
and symbols appear
SMW 900 EDS B4