Electrolux icon Use And Care Manual page 29

Care and cleaning tips
Part Cleaning Agents Tips and Precautions
Interior & • Soap and water
Door Liners • Baking soda and
water
Door Gaskets • Soap and water
Drawers & • Soap and water
Bins
Glass Shelves • Soap and water
• Glass cleaner
• Mild liquid sprays
Toe Grille • Soap and water
• Mild liquid sprays
• Vacuum
Exterior & • Soap and water
Handles • Non abrasive glass
cleaner
Exterior & • Soap and water
Handles • Stainless steel
(Stainless cleaners
Steel Models
Only)
Ice Chute
Extension
The ice chute
extension is designed
to better direct ice
flow into containers.
Removing the Ice Chute
Extension For Cleaning
1 Turn the
refrigerator
off using the
button on
the control
Press Here
panel (refer
to Owner's
Manual).
2 Press
inward
firmly on
the front of
the chute
and pull down.
3 Turn your refrigerator back on.
• Use two tablespoons of baking soda in one
quart of warm water.
• Be sure to wring excess water out of sponge or
cloth before cleaning around controls, light bulb
or any electrical part.
• Wipe gaskets with a clean soft cloth.
• Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins,
drawers, etc.) in dishwasher.
• Allow glass to warm to room temperature before
immersing in warm water.
• Remove toe grille (see Installation Instructions).
• Vacuum both sides and wipe with sudsy cloth or
sponge. Rinse and dry.
• Do not use commercial household cleaners containing
ammonia, bleach or alcohol to clean handles.
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
• Never use CHLORIDE or cleaners with bleach to
clean stainless steel.
• Clean stainless steel front and handles with non-
abrasive soapy water and a dishcloth. Rinse with
clean water and a soft cloth.
• Use a non-abrasive stainless steel cleaner.
These cleaners can be purchased at most home
improvement or major department stores. Always
follow manufacturer's instruction. Do not use
household cleaners containing ammonia or bleach.
• NOTE: Always clean, wipe and dry with grain to
prevent scratching.
• Wash the rest of the cabinet with warm water
and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
Firmly
Pull Down
Care and Cleaning
Installing the Ice Chute
Extension
1 Turn the refrigerator off using the
button on the control panel (refer to
Owner's Manual).
2 Align the extension with the ice chute
so that the snap clips are just inside
the front edge of the chute.
3 Push upward until the extension
snaps into place.
4 Turn your refrigerator back on.
Push Upward Until The
Extension Snaps In Place
29