Table of Contents
Advertisement
•
Do not empty the water reservoir by tilting
the appliance, it can damage the appliance.
Only empty the water reservoir by following
the flush instruction.
•
Do not use the appliance if the plug, the mains
cord or the appliance itself is damaged.
•
If a problem occurs that you cannot solve
by means of this user manual, contact the
Consumer Care Centre in your country. If the
problem cannot be solved, take the appliance
to a service centre authorised by Philips for
examination or repair. Do not attempt to
repair the appliance yourself, otherwise your
guarantee becomes invalid.
3.3 Caution
•
Do not place the appliance on a hot surface
and prevent the mains cord from coming into
contact with hot surfaces.
•
Unplug the appliance if problems occur during
grinding or brewing and before you clean it.
•
Do not move the appliance while it is
operating.
•
The appliance becomes hot during use. Let
the appliance cool down before you store it.
•
During brewing, the lower part of the appliance
and the bottom of the jug become hot.
•
After you have unpacked the appliance, make
sure it is complete and undamaged. If in doubt,
do not use the appliance but contact the
Consumer Care Centre in your country.
•
This appliance is intended for normal
household use only. It is not intended for
use in environments such as staff kitchens
of shops, offices, farms or other work
environments. Nor is it intended to be used
by clients in hotels, motels, bed and breakfasts
and other residential environments.
3.4 Electromagnetic fields
(EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
6
4 Before first use
4.1 Flushing the coffeemaker
You need to flush the coffeemaker once before
first use.
Open the water reservoir lid. Fill the water
1
reservoir with fresh cold water up to the
8-cup indication. (Fig. 2)
Note:
D
Do not put coffee beans or ground coffee in
the coffeemaker.
Close the water reservoir lid.
2
Put the jug in the appliance (Fig. 3).
3
Press the on/off button (Fig. 4).
4
•
The display lights up.
Press the strength select button (Fig. 5).
5
Turn the knob to choose the pre-ground
6
coffee setting (Fig. 6).
•
The pre-ground coffee icon lights up.
Press in the centre of the knob to confirm.
7
Then press in the centre of the knob again to
start the flushing process (Fig. 7).
Let the coffeemaker operate until the flushing
8
process has been completed.
Press the on/off button to switch off the
9
coffeemaker.
Empty the jug.
10
Advertisement
Table of Contents
