List Of Initial Check Items - Canon imageRUNNER ADVANCE C255 Series Service Manual

List of Initial Check Items

Item No.
Installation Envi- 1 The value of power voltage is +/- 10% of the specified voltage.
ronment
2 The machine is installed away from heat and moisture (near a faucet, water heater, or humidifier),
cold place, source of fire or in an area exposed to dust.
3 The machine is not in a place that generates ammonia gas.
4 The machine is not in a place of direct sunlight.
5 The machine is installed in a well-ventilated place where the machine stands horizontally.
6 The power plug of the machine is connected to the output.
Checking the pa- 7 The Canon-recommended paper is used.
per
8 The paper is not moistened. Set paper by taking it out from a new package to output.
Checking the pa- 9 Paper that is within the specified volume is correctly set in the Cassette and Multi-purpose Tray.
per setting
10 When using transparency film, the transparency is set in the correct direction in the Multi-purpose
Tray.
Checking the con- 11 Check the list of estimated life of consumable parts and replace parts that have reached the
sumable parts estimated life.
Checking the peri- 12 Replace parts that have reached the estimated life in accordance with the list of periodical serv-
odically replaced ices and the table of periodically replaced parts.
parts
Check Items
320
6. Troubleshooting
Check