Overview; Location Code; Pickup Position Code; Pickup Size - Canon imageRUNNER ADVANCE C255 Series Service Manual

Overview

This section describes the error codes that are displayed when failure has occurred. The codes are divided into three categories.
Code types
Error Codes This code is displayed when a failure caused by the host machine
has occurred.
Jam code This code is displayed when a jam occurs inside the machine.
Alarm code This code is displayed when some functions are disabled.
Display of error codes
The 7-digit "E000XXX"error code is displayed on the display of the Control Panel. However, since "000" of the 2nd to 4th digits
is not used, the 5th to 7th digits are described as "EXXX" in the Service Manual. (Example: E012 -> E000012)

Location Code

The error codes and jam codes of this machine contain information on the location.
The location information is displayed in 2 digits and has the meaning shown below: (On the jam display screen, the location code
is shown in the "L" column.)
The displayed location code differs depending on the configuration of the options installed.
In the case of alarm codes, the location information does not have any specific meaning.
Device
Not known
ADF
Finisher
Reader
Printer
Controller
Fax

Pickup Position Code

When a jam occurs, the pickup location is indicated with the following pickup position code. (On the jam display screen, the pickup
position code is shown in the "P" column.)
Pickup position
At Finisher jam/At error avoidance jam/At ADF jam without pickup
operation (at SEND, Inbox, etc.)
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Multi-purpose Tray Pickup Assembly
2-sided

Pickup size

When a jam occurs, a paper size is displayed. (The row displaying "SIZE" on the jam screen refers to the paper size.)
Due to the limitation of displayable number of characters, some paper size names are omitted. The following is the list of displayed
row of texts and corresponding paper sizes.
* The following is based on the display specification and not all paper sizes can actually be used.
Description
Error code
00
04
02
04
05
00
07
366
Reference
"EError Code" on page 369
"Jam Code" on page 457
"Alarm Code" on page 464
Location code
Jam code
Pickup position code
00
01
02
03
04
05
F0
7. Error/Jam/Alarm
-
01
02
-
00
-
-