Toshiba B-452-R Printer Driver Operating Manual page 100

7.
When you choose the "Raw" for the Protocol,
enter the printer SOCKET PORT as the "Port
Number" and click the [OK] button.
default port number is "8000" or "9100". Do
the "SNMP Status Enabled"
not check
checkbox.
When you choose the "LRP" for the Protocol,
enter any queue name (e.g. "lpr") and click the
Do not check the "LPR Byte
[OK] button.
Counting Enabled"
Enabled" checkboxes.
Note: When the status monitor feature is used with the
bi-directional support, select the "Raw".
[The default port number]
9100:B-FP series, B-FV series, B-EX6 series
8000:Other
8.
Click the [Next] button, and [Finish] button.
9.
When the "Add Standard TCP/IP Printer Port Wizard" is finished, a new port is added.
The
"SNMP
and Status
- 98 -