Toshiba B-EX6T1 Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Barcode Reader
  5. B-EX6T1
  6. Owner's manual

Toshiba B-EX6T1 Owner's Manual

B-ex6t series
Hide thumbs Also See for B-EX6T1:
Table of Contents

Advertisement

Quick Links

TOSHIBA Barcode Printer
B-EX6T SERIES
Owner's Manual
Mode d'emploi
Bedienungsanleitung
Manual de instrucciones
Gebruikershandleiding
Manuale Utente
Manual do Utilizador

Advertisement

Table of Contents
loading

Related Manuals for Toshiba B-EX6T1

Summary of Contents for Toshiba B-EX6T1

  • Page 1 TOSHIBA Barcode Printer B-EX6T SERIES Owner’s Manual Mode d’emploi Bedienungsanleitung Manual de instrucciones Gebruikershandleiding Manuale Utente Manual do Utilizador...
  • Page 2 TOSHIBA Barcode Printer B-EX6T SERIES Owner's Manual...
  • Page 3 CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany. For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC. This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
  • Page 4 The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic equipment – WEEE) The use of the symbol indicates that this product may not be disposed as unsorted municipal waste and has to be collected separately.
  • Page 5 For Europe This device was tested and certified by Notified Body. Hereby, Toshiba TEC Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment uses the radio frequency band which has not been standardized throughout the EU and EFTA countries.

  • Page 6: Safety Summary

    Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, and then contact your authorised TOSHIBA TEC representative for assistance. Meanings of Each Symbol This symbol indicates warning items (including cautions).
  • Page 7 • Utilize our maintenance services. After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistance once a year to have the inside of the machine cleaned. Dust will build up inside the machines and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy seasons.

  • Page 8: Table Of Contents

    ENGLISH VERSION TABLE OF CONTENTS Page PRODUCT OVERVIEW ......................E1- 1 Introduction ........................E1- 1 Features ........................E1- 1 Unpacking ........................E1- 1 Accessories ......................... E1- 2 Appearance ........................E1- 3 1.5.1 Dimensions ....................... E1- 3 1.5.2 Front View ......................E1- 3 1.5.3 Rear View ......................
  • Page 9 CAUTION! 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification.

  • Page 10: Product Overview

    1. PRODUCT OVERVIEW 1.1 Introduction Thank you for choosing the TOSHIBA B-EX6T series bar code printer. This Owner’s Manual contains from general set-up through to how to confirm the printer operation using a test print, and should be read carefully to help gain maximum performance and life from your printer.

  • Page 11: Accessories

    1. PRODUCT OVERVIEW ENGLISH VERSION 1.4 Accessories Accessories When unpacking the printer, please make sure all the following accessories are supplied with the printer. Power cord CD-ROM(1pc.) (for China) Safety precautions Quick installation manual E1- 2...

  • Page 12: Appearance

    1. PRODUCT OVERVIEW ENGLISH VERSION 1.5 Appearance The names of the parts or units introduced in this section are used in the 1.5 Appearance following chapters. 1.5.1 Dimensions 331 (13.03) 460 (18.1) 309.7 (12.2) Dimensions in mm (inches) 1.5.2 Front View Top Cover LCD Message Display Supply Window...

  • Page 13: Operation Panel

    1. PRODUCT OVERVIEW ENGLISH VERSION 1.5 Appearance 1.5.4 Operation Panel Graphic LCD ERROR LED ONLINE LED PAUSE FEED key RESTART key MODE LEFT key RIGHT ENTER CANCEL key DOWN Please see Section 3 for further information about the Operation Panel. 1.5.5 Interior Supply Holder Ribbon Stopper...

  • Page 14: Options

    Communication. Note: GS/TS12-CN-R do not support theWLAN option I/F. (Please purchase the GS/TS16-CN-R when WLAN I/F is needed.) NOTE: To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA TEC Head Quarters. E1- 5...

  • Page 15: Printer Setup

    2. PRINTER SETUP ENGLISH VERSION 2. PRINTER SETUP 2. PRINTER SETUP This section outlines the procedures to setup your printer prior to its operation. The section includes precautions, loading media and ribbon, connecting cables, setting the operating environment of the printer and performing an online print test.

  • Page 16: Installation

    • For best results, and longer printer life, use only TOSHIBA TEC recommended media and ribbons. • Store the media and ribbons in accordance with their specifications.

  • Page 17: Connecting The Power Cord

    2. PRINTER SETUP ENGLISH VERSION 2.2 Connecting the Power Cord Connecting the 1. Make sure that the printer Power Switch is in the OFF ( ) position. Power Cord Connect the Power Cord to the printer as shown in the figure below. CAUTION! 1.

  • Page 18: Loading Supplies

    2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies Loading Supplies WARNING! 1. Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to load the media once the printer has stopped moving completely.

  • Page 19: Loading The Media

    2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies The following procedure shows the steps to properly load the media into 2.3.1 Loading the Media the printer so that it feeds straight through the printer. The printer prints both labels and tags. 1.
  • Page 20 2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies 2.3.1 Loading the Media Align the tab of the Supply Holder with the groove in the Supply (Cont.) Shaft, and push the Supply Holder against the media until the media NOTE: is held firmly in place. This will center the media automatically. Do not over-tighten the Locking Turn the Locking Ring clockwise to secure the Supply Holder.
  • Page 21 2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies 2.3.1 Loading the Media Lower the Print Head Block. 11. Once the media is loaded it may be necessary to set the Media (Cont.) Sensors used to detect the start position for label or tag. Setting the Feed Gap Sensor position (1) Manually move the Media Sensor so that the Feed Gap Sensor is positioned at the centre of the labels.
  • Page 22 2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies 12. Batch mode 2.3.1 Loading the Media In batch mode, the media is continuously printed until the number of (Cont.) labels/tags specified in the issue command has been printed. Loading with peel off module When the optional Strip Module is fitted, the label is automatically removed from the backing paper at the Strip Plate as each label is printed.
  • Page 23 2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies 2.3.1 Loading the Media (Cont.) 14. Loading with cutter WARNING! When the optional Cutter Module is fitted, the media is automatically cut. A disc cutter is available as an option. The cutter is sharp, so care Insert the leading edge of the media into the cutter until it comes out must be taken not to injure the Media Outlet of the Cutter Module.

  • Page 24: Loading The Ribbon

    2. PRINTER SETUP ENGLISH VERSION 2.3 Loading Supplies 2.3.2 Loading the Ribbon There are two types of media available for printing on: thermal transfer and direct thermal (which has a chemically treated surface). DO NOT LOAD a ribbon when using direct thermal media. NOTES: 1.
  • Page 25 7. Close the Top Cover. Auto Ribbon Saving Mode B-EX6T1 has a ribbon saving function, it is possible to reduce ribbon waste by stopping the ribbon feed for non-print areas. To activate the ribbon save a minimum non-print area is required as below.

  • Page 26: Connecting The Cables To Your Printer

    2. PRINTER SETUP ENGLISH VERSION 2.4 Connecting the Cables to Your Printer 2.4 Connecting the Cables The following paragraphs outline how to connect the cables from the printer to your host computer, and will also show how to make cable to Your Printer connections to other devices.

  • Page 27: Turning The Printer On/Off

    2. PRINTER SETUP ENGLISH VERSION 2.5 Turning the Printer ON/OFF 2.5 Turning the Printer When the printer is connected to your host computer it is good practice to turn the printer ON before turning on your host computer and turn OFF ON/OFF your host computer before turning off the printer.

  • Page 28: Printer Setting

    2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting 2.6 Printer Setting 2.6.1 SCOPE This specification describes key operations using the keys and the LCD of the B-EX6T series high-end industrial bar code printers. 2.6.2 OUTLINE Key operations are different depending on the printer mode: Online mode in which operations are carried out through the keys and error messages are displayed while the printer is connected to the host such as a PC, and the system mode in which self-diagnosis and setting of various parameters are performed.

  • Page 29: Outline Of Each Mode

    2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting 2.6.4 OUTLINE OF EACH MODE This chapter describes the outline of each mode supported by the printer. Refer to each chapter for detailed information. 2.6.4.1 ONLINE MODE This mode is mainly used by users (operators). The label or tag can be issued in the online mode.

  • Page 30: General View Of Key Operation

    2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting 2.6.5 GENERAL VIEW OF KEY OPERATION [Power OFF] Power on Online mode [FEED] key Feeds one label. [RESTART] key [PAUSE] key Pause state Hold down the [PAUSE] key for a few seconds. Threshold setting mode Hold down the [UP] key for a few seconds.
  • Page 31 2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting <Example of the screens> Pause state Threshold setting mode RFID calibration mode Information mode User system mode System mode Download mode Auto configuration mode Notes: 1. To enter the download mode, system mode or auto configuration mode, keep holding down the specified key until the menu is displayed.

  • Page 32: Initial Setting Wizard

    2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting 2.6.6 Initial Setting Wizard THE first time the printer is used after opening carton box or after a RAM clear, the initial setting wizard will start when the power is switched on. This wizard enables setting basic parameters, such as the LCD language and print mode.
  • Page 33 2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting 6.-1-1 Press ENTER to finish. INITIAL CONFIGURATION Finish 　　FINISH？ ◀Prev　 ENTER：Finish ↓ [ENTER] key. 7． The settings are saved. 6.-2 When “OFF” is selected for CALIBRATE 6.-2-1 Choose the desired option PAPER DETECT FEED/GAP ▲...
  • Page 34 2. PRINTER SETUP ENGLISH VERSION 2.6 Printer Stting Key functions (Wizard screen) Substitute key Function [MODE] None Returns to the top page without saving the changes. [CANCEL] [FEED] + [RESTART] Returns to the upper level menu without saving the changes. [ENTER] [PAUSE] In the case of option selection screen, saves the changes and...

  • Page 35: Printer Drivers

    2.7 Printer Driver 2.7 Printer Drivers Once you install the TOSHIBA printer driver on your Windows host computer, you can use the TOSHIBA bar code printer in the same way you would a laser or ink jet printer. You can use the printer by connecting a USB or LAN cable to your host computer.

  • Page 36: Print Test

    2.PRINTER SETUP ENGLISH VERSION 2.8 Print test Print Test After your drivers have been installed , perform a print test. Performing a print test using the Printer Driver The printer driver’s Properties screen allows you to set the communication conditions, media size, and other printing conditions in accordance with your operating environment.

  • Page 37: Online Mode

    3. ONLINE MODE ENGLISH VERSION 3.1 Key Functions This chapter describes the usage of the keys on the Operation Panel in ONLINE MODE Online mode. When the printer is in Online mode and connected to a host computer, the 3.1 Key Functions normal operation of printing on labels or tags can be accomplished.

  • Page 38: Lcd

    3. ONLINE MODE ENGLISH VERSION EO1-33089 3.2 LCD Online state 3.2 LCD (5) (6) Error state (10) (11) (12) (Example: Head open error) Description Model name and firmware version Message The number of labels printed IP address (only when LAN/WLAN is enabled.) Radio signal strength (only when WLAN is enabled.) Indicates the strength of the radio signal in 4 levels.

  • Page 39: Icon

    3. ONLINE MODE ENGLISH VERSION EO1-33089 3.3 Icon 3.3 Icon Five kinds of icon are displayed in the bottom line of the online mode screen. These icons are displayed only in the online mode screen. Icon Explanation Wireless LAN icon Displayed and used when the wireless LAN module is installed.

  • Page 40: Operation Example

    3. ONLINE MODE ENGLISH VERSION 3.4 Operation Example 3.4 Operation Example Online Mode Idling or normal issuing When [RESTART] key is pressed, When [PAUSE] key is the printer resumes printing if there pressed while printing: is remaining data. Printing is stopped. If the print head is Close the print head.
  • Page 41 3. ONLINE MODE ENGLISH VERSION 3.4 Operation Example 3.4 Operation Example (Cont.) Help Guide Message Idling or normal issuing Load media. When [RESTART] key is pressed, the If an error occurs printer resumes printing if there is while printing: remaining data. Printing is stopped and Help guide is displayed.
  • Page 42 3. ONLINE MODE ENGLISH VERSION 3.4 Operation Example 3.4 Operation Example (Cont.) Cancellation of Print Job While [CANCEL] is held down, the received data is discarded. (Quick reset) Idling or normal issuing When [PAUSE] key is pressed while printing: Hold down [CANCEL] for 3 sec. or more. If an error occurs while Hold down [CANCEL] for 3 sec.

  • Page 43: User System Mode

    3. ONLINE MODE ENGLISH VERSION 3.5 User System Mode 3.5 USER SYSTEM MODE 3.5.1 OUTLINE OF USER SYSTEM MODE 1. The printer enters the user system mode with the following operations. While the printer is in pause state, perform either of the following operations: ・...

  • Page 44: Power Save Function

    3. ONLINE MODE ENGLISH VERSION 3.6 Power Save Function Power Save Function 3.6.1 Entering the Power When the printer stays in any of the following statuses for the Saving Mode specified length of time, it enters power saving mode. • Online (Idle, communicating) •...

  • Page 45: Maintenance

    4. MAINTENANCE ENGLISH VERSION 4.1 Cleaning MAINTENANCE This chapter describes how to perform routine maintenance. WARNING! To ensure the continuous high quality operation of the printer, you should 1. Be sure to disconnect the perform a regular maintenance routine. For high usage it should be done power cord before on a daily basis.

  • Page 46: Covers And Panels

    4.1.1 Print Head/Platen/ swab or soft cloth slightly moistened with alcohol . Sensors (Cont.) NOTE: Please purchase the Print Head Cleaner from your Print Head authorised TOSHIBA TEC service representative. Pinch Roller Print Head Feed Roller Element Platen Black Mark Sensor/ Feed Gap Sensor 7.

  • Page 47: Optional Cutter Module

    4. MAINTENANCE ENGLISH VERSION 4.1 Cleaning 4.1.3 Optional Cutter Module The disc cutter is available as an option. WARNING! 1. Turn off the power and open the Top Cover. 1. Be sure to turn the power 2. Turn the Head Lever to Free position, then release the Print Head off before cleaning the Block Holder Plate Cutter Module.

  • Page 48: Troubleshooting

    WARNING! If a problem cannot be solved by taking the actions described in this chapter, do not attempt to repair the printer. Turn off and unplug the printer, then contact an author TOSHIBA TEC service representative for assistance. 5.1 Error Messages NOTES: •...
  • Page 49 Turn off the printer and allow it to cool EXCESS HEAD TEMP down for about 3 minutes. If this does not solve the problem call a TOSHIBA TEC authorised service representative. There is a problem with the Print Head. Replace the Print Head.
  • Page 50 RTC and reset the printer. As long as the power is on the date and time will be correct. Call a TOSHIBA TEC authorised service representative to replace the battery. While the printer is in the Download Turn the printer off, and then on again.

  • Page 51: Possible Problems

    5. TROUBLESHOOTING ENGLISH VERSION 5.2 Possible Problems 5.2 Possible Problems This section describes problems that may occur when using the printer, and their causes and solutions. Possible Problems Causes Solutions The printer will not 1. The Power Cord is disconnected. 1.

  • Page 52: Removing Jammed Media

    NOTE: from label stock on the cutter. Do not use non-specified media in the If you get frequent jams in the cutter. cutter, contact a TOSHIBA TEC authorized service representative. CAUTION! When removing the jammed media, be careful not to damage the print head with hard objects like watches or rings.

  • Page 53: Printer Specifications

    6. PRINTER SPECIFICATIONS ENGLISH VERSION 6. PRINTER SPECIFICATIONS 6. PRINTER SPECIFICATIONS This section describes the printer specifications. Model B-EX6T1/T3-GS B-EX6T1/T3-TS Item Destination QM: World wide B-EX6T1/T3-GS12-QM-R B-EX6T1/T3-TS12-QM-R CN: China B-EX6T1/T3-GS12-CN-R B-EX4T1/T3-TS12-CN-R Dimension (W x D x H) 331 mm x 460 mm x 310 mm...
  • Page 54 6. PRINTER SPECIFICATIONS ENGLISH VERSION 6. PRINTER SPECIFICATIONS Model B-EX6T1/T3-GS B-EX6T1/T3-TS Item Bar code types JAN/EAN/UPC, CODE128, CODE93, CODE39(S, F,) MSI, Interleaved 2 of 5, Customer bar code, GS1 DataBar (including composite) Two-dimensional code Data Matrix, PDF417, Micro PDF417, QR code, MaxiCode, CP code, Micro...
  • Page 55 6. PRINTER SPECIFICATIONS ENGLISH VERSION 6. PRINTER SPECIFICATIONS NOTES: • Data Matrix is a trademark of International Data Matrix Inc., U.S. • PDF417 is a trademark of Symbol Technologies Inc., US. • QR Code is a trademark of DENSO CORPORATION. •...

  • Page 56: Supply Specifications

    7. SUPPLY SPECIFICATIONS 7.1 Media Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a problem is caused by using media that is not approved by TOSHIBA TEC. For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorized service representative.
  • Page 57 ID φ76.2±0.3mm NOTES: 1. To ensure print quality and print head life use only TOSHIBA TEC specified media. 2. When using the peel-off at 12”/sec or more for 203dpi model, issue at 10”/sec. When using the peel-off at 10”/sec or more for 305dpi model, issue at 8”/sec.

  • Page 58: Detection Area Of The Transmissive Sensor

    7. SUPPLY SPECIFICATIONS ENGLISH VERSION 7.1 Media 7.1.2 Detection Area of the Transmissive Sensor The Transmissive Sensor is movable from the centre to the left edge of media. The Transmissive Sensor detects a gap between labels, as illustrated below. ＜Tags＞ Min 12 mm ＜Labels＞...

  • Page 59: Detection Area Of The Reflective Sensor

    7. SUPPLY SPECIFICATIONS ENGLISH VERSION 7.1 Media 7.1.3 Detection Area of the Reflective Sensor 1. The sensor is movable in the range from the center of the paper to the left end. 2. The reflectance of the black mark must be 10% or less with a waveform length of 950 nm. 3.

  • Page 60: Effective Print Area Of Paper

    7. SUPPLY SPECIFICATIONS ENGLISH VERSION 7.1 Media 7.1.4 EFFECTIVE PRINT AREA OF PAPER 7.1.4.1 Relationship between Print Head Effective Print Width and Paper Width Paper Paper position position (Left) (Right) Printing area Outside Outside printing 160.0mm±0.2mm (203DPI) printing area 5 mm 5 mm area 159.9mm±0.2mm (305DPI)

  • Page 61: Ribbon

    7.2 Ribbon 7.2 Ribbon Please make sure that the ribbon being used is approved by TOSHIBA TEC. The warranty does not apply to any problem caused by using non-approved ribbons. For information regarding TOSHIBA TEC approved ribbon, please contact a TOSHIBA TEC service representative.

  • Page 62: Care/Handling Of Media And Ribbon

    7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33089 7.2 Ribbon 7.3 Recommended Media and Ribbon Types (Cont.) Ribbon type Description Smear-less ribbon (Wax resin ribbon) Good match for coated paper. The printed image will resist water and light rubbing. Very good match for plastic films (synthetic paper, PET, polyimide, Scratch and solvent resistance ribbon etc.) Scratch and solvent resistance...

  • Page 63: Appendix 1 Messages And Leds

    APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION APPENDIX 1 MESSAGES AND LEDS APPENDIX 1 MESSAGES AND LEDS Appendix 1 describes the LCD messages displayed on the operation panel. Symbols in the message : The LED is illuminated. : The LED is flashing. : The LED is unlit.
  • Page 64 APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION APPENDIX 1 MESSAGES AND LEDS Data cannot be read from/written to a 22 EEPROM ERROR backup EEPROM properly When the following abnormal operations are performed, a system error occurs: (a) Command fetch from an incorrect address.
  • Page 65 APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION APPENDIX 1 MESSAGES AND LEDS NOTES: • If an error is found in a command received, up to 42 bytes of the erroneous command, starting from the command code, will be displayed. (However, [LF] and [NUL] will not be displayed.) Example 1 [ESC]PC001;0A00,0300,2,2,A,00,B[LF][NUL] Command error...

  • Page 66: Appendix 2 Interface

    APPENDIX 2 INTERFACE ENGLISH VERSION APPENDIX 2 INTERFACE APPENDIX 2 INTERFACE NOTE: To prevent radiation and reception of electrical noise, the interface cables must meet the following requirements: • In case of a parallel interface cable or serial interface cable, fully shielded and fitted with metal or metallised connector housings.
  • Page 67 APPENDIX 2 INTERFACE ENGLISH VERSION APPENDIX 2 INTERFACE Serial interface (Option: B-EX700-RS-QM-R) Type: RS-232C Communication mode: Full duplex Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps Synchronization: Start-stop synchronization Start bit: 1 bit Stop bit 1 bit, 2 bit Data length: 7 bit, 8 bit...
  • Page 68 APPENDIX 2 INTERFACE ENGLISH VERSION APPENDIX 2 INTERFACE Connector: SPP Mode Nibble Mode nStrobe HostClk Data 1 Data 1 Data 2 Data 2 Data 3 Data 3 Data 4 Data 4 Data 5 Data 5 Data 6 Data 6 Data 7 Data 7 Data 8 Data 8...
  • Page 69 Default subnet mask: 255.255.255.0 NOTE: MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of an access point. Please ask a service person of your nearest TOSHIBA TEC service representative. EA2- 1...
  • Page 70 APPENDIX 2 INTERFACE ENGLISH VERSION APPENDIX 2 INTERFACE Expansion I/O Interface (Option: B-EX700-IO-QM-R) Input Signal IN0 to IN5 Output Signal OUT0 to OUT6 Connector FCN-781P024-G/P or equivalent (External Device Side) Connector FCN-685J0024 or equivalent (Printer Side) Signal Function Signal Function Input FEED OUT6...
  • Page 71 APPENDIX 2 INTERFACE ENGLISH VERSION APPENDIX 2 INTERFACE RFID • (Option)B-EX706-RFID-U4-US-R Module: TOSHIBATEC TRW-USM-10 Frequency: 902.75-927.25Mhz Output: 10 to 100 mW Available RFID tag: EPC C1 Gen2, ISO-18000-6C • (Option)B-EX706-RFID-U4-EU-R Module: TOSHIBATEC TRW-EUR-10 Frequency: 869.85 MHz (UHF Europe) Output: 10 to 100 mW Available RFID tag: EPC C1 Gen2, ISO-18000-6C •...

  • Page 72: Appendix 3 Print Samples

    APPENDIX 3 PRINT SAMPLES ENGLISH VERSION APPENDIX 3 PRINT SAMPLES APPENDIX 3 PRINT SAMPLES Font EA3- 1...
  • Page 73 APPENDIX 3 PRINT SAMPLES ENGLISH VERSION APPENDIX 3 PRINT SAMPLES APPENDIX 3 PRINT SAMPLES (Cont.) Bar codes JAN8, EAN8 Interleaved 2 of 5 CODE39 (Standard) JAN13, EAN13 UPC-E EAN13+2 digits EAN13+5 digits CODE128 CODE39 (Full ASCII) CODE93 UPC-E+2 digits UPC-E+5 digits EAN8+2 digits EAN8+5 digits UPC-A...
  • Page 74 APPENDIX 3 PRINT SAMPLES ENGLISH VERSION APPENDIX 3 PRINT SAMPLES UPC-A+5 digits UCC/EAN128 Industrial 2 of 5 POSTNET Customer bar code Customer bar code of high priority KIX Code RM4SCC Data Matrix MicroQR QR code Micro PDF417 MaxiCode CP Code PDF417 EA3- 3...
  • Page 75 APPENDIX 3 PRINT SAMPLES ENGLISH VERSION APPENDIX 3 PRINT SAMPLES Ԃ GS1 DataBar family (with no compound composite printed) GS1 DataBar (Truncated) GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded GS1 DataBar Expanded Stacked UPC-A UPC-E EAN-13 EAN-8...
  • Page 76 APPENDIX 3 PRINT SAMPLES ENGLISH VERSION APPENDIX 3 PRINT SAMPLES Ԃ GS1 DataBar family (with compound composite printed) GS1 DataBar (Truncated) GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded Stacked GS1 DataBar Expanded UPC-A UPC-E EAN-8 EAN-13 UCC/EAN-128 with CC-A or CC-B...

  • Page 77: Appendix 4 Glossaries

    APPENDIX 4 GLOSSARIES ENGLISH VERSION APPENDIX 4 GLOSSARIES APPENDIX 4 GLOSSARIES Barcode Expansion I/O interface A code which represents alphanumeric characters An interface circuit that may be installed to allow by using a series of black and white stripes of the printer to be connected to an external device different widths.
  • Page 78 APPENDIX 4 GLOSSARIES ENGLISH VERSION APPENDIX 4 GLOSSARIES Printer IP address A 32-bit address of a printer connected to TCP/IP A type of media with no adhesive, usually made network, which identifies the printer. An IP from cardboard or other durable material. address is written as 4 sets of numbers, separated by full stops.
  • Page 79 EO1-33107 © 2015, 2016 TOSHIBA TEC CORPORATION All Rights Reserved 1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN...

This manual is also suitable for:

B-ex6t1 gs12B-ex6t3 tsB-ex6t seriesB-ex6t1-tsB-ex6t3-gs12

Table of Contents