DeWalt DCT412 Original Instructions Manual page 44

EN GLI SH
Date and Time Setup
1. Press the forward or back arrow to highlight the
field to change.
2. Press the OK button to activate the field (field
turns green).
3. Press the forward or back arrow to change the
activated field.
4. Press the OK button to save changes (field
turns yellow).
5. Repeat above steps to change remaining fields.
6. Press the main menu button to exit.
BASIC OPERATION
NOTE: At any time during the camera operation,
pressing the main menu button will return to the
previous menu.
To Record Photos or Videos (fig. 2, 3)
Be sure a micro SD card (sold separately) is loaded
in the card slot (h).
1. Turn both the camera (b) and the handle set (g)
on.
2. Aim camera at destination.
A. Press the camera button (l) to take a photo.
A confirmation icon will appear in the top
right side of screen.
OR
B. Press the record button (m) to start
recording.
A red dot will appear in the top right side
of the screen. To stop recording, press the
record button again.
42
The camera will create a folder on the micro SD card
for that day. All photos or videos taken that day will
be stored in this folder.
To View Photos or Videos
1. Press the main menu button to show the Main
Menu.
2. Press the forward or back arrow to select the
Folder option.
3. Press the OK button to navigate to the next
screen.
4. Press the forward or back arrow to select a
dated folder.
5. Press the OK button to select the dated folder.
6. Press the forward or back arrow to select the
photo or video.
7. Press the OK button to view the photo or video.
8. Press the forward or back arrow to advance to
the next photo or video.