Therapy Device; Where To Place Your Device; Supplying Ac Power To Your Device - Philips DreamStation Go User Manual

3. Therapy Device

Where to Place Your Device

Place the device on a firm, flat surface somewhere within easy reach of where you will
use it. The device should sit at a level lower than your sleeping position. Make sure the
device is away from any heating or cooling equipment (e.g., forced air vents, radiators, air
conditioners).
Note
When positioning the device, make sure that the power cable is accessible
because removing power is the only way to turn off the device.

Supplying AC Power to Your Device

Complete the following steps to operate the device by plugging the AC power cord into
an electrical outlet.
1. Plug the power cord connector into the power inlet on the back of the device.
2. Plug the pronged end of the AC power cord into an electrical outlet that is not
controlled by a wall switch.
3. Make sure that all connections are secure.
12