D-Link DAP-2695 Command Line Interface Reference Manual page 15

set groupkeyupdate
set passphrase
set autorekey
set rogue_set_type_mac
WDS
Get Command:
get wdsinfo
get wdsmac
get wdsscaninfo
Set Command:
set wdsmacadd
set wdsmacdel
set wdsscan
TCM Command:
tcm status
tcm mode
tcm uprate
tcm downrate
tcm show
tcm mode
Preferred
Get Command:
get preferred5g
802.11 b/g /n Access Point Command Line Interface Manual
Set Group Key Update Interval (in Secs: 300-9999999)
Modify Passphrase (size:8--63)
Set autorekey enable
set rogue ap index type and mac < type macaddradd macaddress>
Function
Display wds Info
Display WDS MAC Address List
Display wds site survey Info
Function
Add WDS MAC Addr <macaddress xx:xx:xx:xx:xx> [INDEX]
DEL WDS MAC Addr [INDEX]
Set wds site survey
Function
tc monitor enable/disable
tcm mode disable/ssid_average/ssid_fixed/sta_wlmode/sta_fixed
ssid 1-16
tcm uprate xx kbps/mbps [ssid 1-16]/total (total must be mbps)
tcm downrate xx kbps/mbps [ssid 1-16]/total (total must be mbps)
show setting of tc monitor
tcm mode disable/ssid_average/ssid_fixed/sta_wlmode/sta_fixed
ssid 1-16(9-16 for dual) sta_wlmode / sta_fixed ssid 1-16
Function
Display preferred5g
set groupkeyupdate [300--9999999]
set passphrase [8--63]
set autorekey
set rogue_set_type_mac [macaddress]
get wdsinfo
get wdsmac
get wdsscaninfo
set wdsmacadd [index]
set wdsmacdel [index]
set wdsscan
tcm status
tcm mode [disable / ssid_average / ssid_fixed /
sta_wlmode / sta_fixed ssid 1-16]
tcm uprate [xx kbps/mbps [ssid 1-16]/total (total
must be mbps)]
tcm downrate [xx kbps/mbps [ssid 1-16]/total
(total must be mbps)]
tcm show
tcm mode
get preferred5g
15
Syntax
Syntax
Syntax
Syntax