Utility Commands - D-Link DAP-2695 Command Line Interface Reference Manual

Help Command:
help
Ping Command:
ping
Restart and Exit Commands:
set factorydefault
reboot
ssl freset
get bootcodeinfo
Version & HW Display
Command:
version
get cpuinfo
get meminfo
get hardware
get macaddress
get country
get pingctl
get inact
set pingctl
802.11 b/g /n Access Point Command Line Interface Manual
Function
Display CLI Command List
Function
Send ICMP ECHO_REQUEST to network hosts
Function
Restore to factory default setting
Reboot Access Point. It is necessary to reboot the AP after making
Configuration changes for those changes to take effect.
Use freset to factorydefault
Display bootcode information
Function
Displays the currently loaded firmware version
Display cpu info percentage
Display mem info percentage
Display Hardware Revisions
Display Mac address
Display Country
Display Ping Control state
Display the value of a specific inact
Set Ping Control
8

UTILITY COMMANDS

Syntax
help or ?
Syntax
ping <xxx.xxx.xxx.xxx>
Syntax
set factorydefault
reboot
ssl freset
get bootcodeinfo
Syntax
version
get cpuinfo
get meminfo
get hardware
get macaddress
get country
get pingctl
get inact
set pingctl
3