Philips DL8781 Manual page 16

English
16
4222_100_4583_1_DFU_booklet luxury_A5_v3.indd 16
-
Weight is shown on the display of the device after weight
measurement ends.
3 BIA measurement starts (when measuring barefoot).
-
The symbol 'BIA' flashes on the display to indicate the device is
analyzing your data.
4 Stand still and keep full contact with the measurement platform until
the symbol 'BIA' stops flashing. The device beeps to indicate that the
measurement is completed. The results of the BIA will not be shown on
the display.
5 The device is equipped with user profile recognition and automatically
selects the user based on their weight.
-
When the device immediately displays the weight: no user is recognized
and results are not stored. See below for instructions.
-
When the device shows multiple users: more users are recognized based
on your weight. See below for instructions.
6 The measurement results are stored in the device in case of a
successful BIA.
-
The device can store up to 40 measurement results for each user profile.
The oldest results will be replaced by new measurement results.
7 After measuring, step off the device. It switches off automatically.
When the device does not automatically recognize the correct
user profile:
-
To select the correct user profile, step off the device and tap on the
measurement platform to confirm the correct user profile.
-
All profiles will be shown alternately on the display. Tap on the scale to
confirm your user profile.
-
Make sure that you select the correct user.
12/02/16 14:36