Table of Contents
Advertisement
Factory reset
Cleaning and storage
Accessories
Disposal
4222_100_4583_1_DFU_booklet luxury_A5_v3.indd 17
To add up to 8 new user profiles or delete all measurement results from the
device, you can perform a factory reset. With the factory reset the device is
cleared from all existing user profiles and measurement results.
1 With the device turned on, press and hold the measurement unit button
located on the bottom of the device for 20 seconds, until "FACt" is shown
on the display. Now all data is deleted.
-
After resetting the scale will automatically turn off.
-
You can now create new users profiles (see 'Pairing the body analysis
scale to your mobile device and create a user profile').
Caution: Never immerse the device in water and do not rinse it
under the tap.
1 Wipe the surface of the device with a cloth.
-
Use a dry cloth to wipe dust off the surface of the device.
-
Use a slightly damp cloth to wipe dirt off the surface of the device.
Dry the surface with a dry cloth after cleaning.
Caution: Do not use propellant, abrasive or other chemicals to
clean the device in order to avoid discoloration or malfunction of
the scale.
2 Store the device in a dry, dust-free place away from direct sunlight or
other heat sources. Avoid surroundings with fluctuating temperatures
(see Specifications').
Caution: Do not drop the device.
This device has no other user-serviceable parts.
For assistance call 1-844-531-6861.
Philips accessories may be purchased at a store near you, or on our website
www.philips.com/store.
This product contains batteries:
-
Dispose of batteries properly. Do not incinerate.
Batteries may explode if overheated.
-
Do not wrap in metal or aluminum foil.
Tape the waste battery terminals before discarding.
-
It is suggested that you contact your local town or city to determine
proper battery recycling site(s) in your area.
-
Battery must be removed from the device before discarding.
English
17
12/02/16 14:37
Advertisement
Table of Contents
