Default Value
RINGBACK_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
HOLD_ALARM_FRQ
Value Format
Description
Value Range
Default Value
HOLD_ALARM_GAIN
Value Format
Description
Value Range
Default Value
CW_TONE1_FRQ
Value Format
Description
Value Range
Default Value
CW_TONE1_GAIN
Value Format
Description
Value Range
Document Version 2016-05
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to
10 whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Continuous)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
Tone Timings
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold alarm using
2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
INTEGER
Specifies the gain, in decibels, of the hold alarm.
-24–24 (dB)
0
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of call waiting tone 1
using 2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
INTEGER
Specifies the gain, in decibels, of call waiting tone 1.
-24–24 (dB)
5.3.33 Tone Settings
Administrator Guide
281