Panasonic KX-HDV430 Administrator's Manual page 313

Hide thumbs Also See for KX-HDV430:
Table of Contents

Advertisement

Element
Digit
0–9, *, #, +
Wildcard
X, x
Range
[ ]
Subrange
-
Repeat
.
Substitution
<(before):(after)>
Timer
S, s (second)
Macro Timer
T, t
Reject
!
Alternation
|
Comma
,
Note
You can enter up to 1000 characters in [Dial Plan].
Document Version 2016-05
Available Value
Example: "123"
If the dialed phone number is "123", the call is made
immediately.
Example: "12xxxxx"
If the dialed phone number is "12" followed by any 5-digit
number, the call is made immediately.
Example: "[123]"
If the dialed phone number is either one of "1", "2", or "3", the
call is made immediately.
Example: "[1-5]"
If the dialed phone number is "1", "2", "3", "4", or "5", the call is
made immediately.
Example: "1."
If the dialed phone number is "1" followed by zero or more "1"s
(e.g., "11", "111"), the call is made.
Example: "<101:9999>"
If the dialed phone number is "101", "101" is replaced by "9999",
and then the call is made immediately.
Example: "1x.S2"
If the dialed phone number begins with "1", the call is made after
a lapse of 2 seconds.
Example: "1x.T"
If the dialed phone number begins with "1", the call is made after
a lapse of "T" seconds.
Example: "123xxx!"
If the dialed phone number is "123" followed by 3 digits, the call
is not made.
Example: "1xxxx|2xxx"
If the dialed phone number is "1" followed by 4 digits, or "2"
followed by 3 digits, the call is made immediately.
You can use this element to specify multiple numbers.
Example: "9,xxxxxxxxxxx.T"
If 9 is dialed, the second dial tone is heard, and then 11 digits
are dialed, the call is made after waiting "T" seconds. * The
dialing will include the initially dialed "9".
A subrange is only valid for single-digit numbers. For
example, "[4-9]" is valid, but "[12-21]" is invalid.
The number (0–9) followed by "S" or "s" shows the duration in
seconds until the call is made.
The value of "T" or "t" can be configured through the Web
user interface (→ see [Timer for Dial Plan] in 4.6.1.1 Call
Control).
6.2.1 Dial Plan Settings
Description
Administrator Guide
313

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents