Secondary fan (EliteDesk 800 G3 65 W models only)
HP EliteDesk 800 G3 65 W models include a secondary fan installed under the hard drive.
1.
Prepare the computer for disassembly
2.
Remove the top cover
3.
Remove the hard drive
4.
Disconnect the fan plug from the system board (1).
5.
Remove the three screws (2) that secure the secondary fan to the computer.
6.
Lift the fan out of the chassis (3).
To install the secondary fan, reverse the removal procedure.
32
Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Top cover on page
21).
(Hard drive on page
29).
20).