Wlan Module - HP EliteDesk 800 G3 Maintenance And Service Manual

WLAN module

Description
Intel 8265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
Intel 7265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
Intel 3168 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
The WLAN module is secured with one Phillips screw and has two connected antennas. It is located under the
hard drive cage.
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. If your model is an EliteDesk 800 G3, remove the secondary fan
models only) on page
5. Remove the drive cage
6. Locate the WLAN module on the system board.
7. Disconnect both antenna cables (1) from the WLAN module.
NOTE:
disconnect and connect the antenna cables.
8. Remove the screw (2) that secures the WLAN module to the system board.
36 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Top cover on page
(Hard drive on page
32).
(Drive cage on page
You may need to use a small tool, such as a pair of tweezers or needle-nose pliers, to
(Preparation for disassembly on page
21).
29).
33).
20).
(Secondary fan (EliteDesk 800 G3 65 W