Devicenet Master Equipment Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.6

DeviceNet master equipment Side Settings

This section explains how to set the DeviceNet master equipment.
■1. Installing the EDS file for GOT
Install the EDS file for GOT to the configuration tool on the DeviceNet master equipment side, and set the GOT as
slave equipment.
For how to acquire the EDS file for GOT, refer to the following.
➠
■2. Communication configuration
Set the communication parameters on the DeviceNet master equipment side using the switches or configuration tool.
Master equipment
Slave equipment
*1
*2
*3
*4
4 - 8
4.6 DeviceNet master equipment Side Settings
POINT POINT POINT
DeviceNet master equipment
For the details of the DeviceNet master equipment setting method, refer to the manual of the
used DeviceNet master equipment.
4.5Preparation of EDS File for GOT
Item
*1
Station No.
*2
Transmission speed
*3
Input Size (Word)
*3
Output Size (Word)
*1*4
Station No.
Make sure that the station No. does not overlap.
When the setting of "Transmission Speed" on the GOT side is not set to "Automatic", align it with the setting on the master
equipment side.
➠
4.4GOT Side Settings
Align the settings of "Input Size (Word)" and "Output Size (Word)" on the GOT side with the settings on the master equipment
side.
Align the setting of "Station No." on the GOT side with the station No. of the slave equipment.
➠
4.4GOT Side Settings
Setting range
0 to 63
125kbps
250kbps
500kbps
0 to 128
0 to 128
0 to 63