Mitsubishi Electric GOT2000 Series Connection Manual page 305

POINT POINT POINT
(1) Routing parameter setting of relay station
Routing parameter setting may also be necessary for the relay station. For the setting, refer
to the following.
➠
Manuals of SLMP equipment
(2) Parameter reflection function of MELSOFT Navigator
(a) The color of the cells for the items which are reflected to GT Designer3 from MELSOFT
Navigator changes to green. Set items, which are displayed in green cells, from the
MELSOFT Navigator.
(b) When the settings of Transfer network No., Relay network No. or Relay station No. are
reflected to the parameter from the MELSOFT Navigator, those settings are added. Items
set in advance are not deleted. However, if the target network No. overlaps, the item set
in advance is overwritten.
(c) The routing information is used manually by the user when the data is created.
Therefore, after changing the network configuration by MELSOFT Navigator, create a
routing information again. For details of the creation of the routing information, refer to
the MELSOFT Navigator help.
8.3 GOT Side Settings
8
8 - 11