D-Link AC750 User Manual page 38

Section 3 - Configuration
If you choose Static IP, please configure the following fields:
STATIC IP ADDRESS INTERNET CONNECTION TYPE :
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS
Enter the primary DNS server IP addresses.
Server:
Secondary DNS
Enter the secondary DNS server IP addresses.
Server :
MTU Size:
Enter the MTU size.
MAC Address:
If your Internet connection is tied to a specific PC or hardware, enter
it manually or click Clone Your PC's MAC Address.
When you have finished configuring your Internet connection, click the Save Settings
button.
D-Link DIR-819 User Manual
Static IP
DIR-819
INTERNET
WAN
Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE,
PPTP, L2TP, and DS-Lite. If you are unsure of your connection method, please contact your Internet Service Provider.
Note : If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.
Save Settings
INTERNET CONNECTION TYPE
Choose the mode to be used by the router to connect to the Internet.
STATIC IP ADDRESS INTERNET CONNECTION TYPE :
Enter the static address information provided by your Internet Service Provider (ISP).
Save Settings
SETUP
WAN
Don't Save Settings
My Internet Connection is : Static IP ▼
IP Address :
Subnet Mask :
Default Gateway :
Primary DNS Server :
Secondary DNS Server : (optional)
MTU :
1500
MAC Address :
Clone Your PC's MAC Address
Don't Save Settings
34