D-Link AC750 User Manual page 64

Section 3 - Configuration
If you choose Static IPv6 address and Route as your Internet Connection, enter your IP address, configure the following settings:
SET STATIC IPV6 ADDRESS CONNECTION
Use Link-Local Enable or disable using the Link-Local Address. The IPv6 Address and
Address: Subnet Prefix Length is automatically populated with this function.
IPv6 Address: Enter the address supplied by your ISP.
Subnet Prefix Enter the subnet prefix length supplied by your ISP.
Length:
Default Gateway: Enter the default gateway for your IPv6 connection.
Primary IPv6 DNS Enter the primary DNS server address.
Address:
Secondary IPv6 Enter the secondary DNS server address.
DNS Address:
LAN IPv6 Address: Enter your the LAN IPv6 Address you want to use.
Click Next to continue.
Click Connect to finish the setup.
D-Link DIR-819 User Manual
IPv6 Internet Connection Setup Wizard
Static IPv6 address and Route
SETUP COMPLETE!
SET STATIC IPV6 ADDRESS CONNECTION
To set up this connection you will need to have a complete list of IPv6 information provided by your IPv6 Internet
Service Provider. If you have a Static IPv6 connection and do not have this information, please contact your ISP.
☑
Use Link-Local Address :
IPv6 Address :
Subnet Prefix Length :
Default Gateway :
Primary IPv6 DNS Address :
Secondary IPv6 DNS Address :
LAN IPv6 Address :
Prev Next Cancel
SETUP COMPLETE!
The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot
the router.
Prev Next Cancel
Connect
Connect
60