D-Link AC750 User Manual page 39

Section 3 - Configuration
If you choose Dynamic IP (DHCP), please configure the following fields:
STATIC IP ADDRESS INTERNET CONNECTION TYPE :
Host Name: Enter the host name of the router.
Use Unicasting: Check this box if you are having difficulty obtaining a DHCP address
from your ISP.
Primary DNS Enter the primary DNS server IP addresses.
Server:
Secondary DNS
Enter the secondary DNS server IP addresses.
Server :
MTU Size:
Enter the MTU size.
MAC Address:
If your Internet connection is tied to a specific PC or hardware, enter
it manually or click Clone Your PC's MAC Address.
When you have finished configuring your Internet connection, click the Save Settings
button.
D-Link DIR-819 User Manual
Dynamic IP (DHCP)
DIR-819
INTERNET WAN
WAN
Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE,
PPTP, L2TP, and DS-Lite. If you are unsure of your connection method, please contact your Internet Service Provider.
Note : If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.
Save Settings Don't Save Settings
INTERNET CONNECTION TYPE
Choose the mode to be used by the router to connect to the Internet.
My Internet Connection is : Dynamic IP (DHCP)
DYNAMIC IP (DHCP) INTERNET CONNECTION TYPE :
Use this Internet connection type if your Internet Service Provider (ISP) didn't provide you with IP Address information
and/or a username and password.
Host Name : dlinkrouter
☐
Use Unicasting :
(compatibility for some DHCP Clients)
Primary DNS Server :
Secondary DNS Server :
MTU : 1500
MAC Address :
Clone Your PC's MAC Address
Save Settings Don't Save Settings
SETUP
▼
(optional)
35