Troubleshooting - Toshiba ABX3250KN User Manual

18

Troubleshooting

Problem:
The unit does not switch on.
No sound from the Audio Base
No sound from the subwoofer
The sound of Bluetooth
device is interrupted.
Remote control does not work
properly
Connection (NFC) is not
available
ABX3250KN_IB_28-02-2014_L.indd 18
Solution:
Make sure it is plugged into a AC power outlet and the outlet is
turned ON.
Press the STANDBY button located on the top of the Audio Base,
and check to see if the STANDBY indicator turns off.
Turn the subwoofer power switch to ON.
Press the VOL
Ensure the source you have selected is outputting audio. If you
are using "audio out" from your TV, please ensure your TV is
configured to output audio (see TV's menu settings).
Ensure your audio connections are properly made (check that you
don't have any loose connections).
Ensure you have selected the correct source (input) - the display
of the Audio Base will shown the currently-selected source (input).
Press the MUTE button on the remote control to ensure the Audio
Base is not muted.
Move the subwoofer closer to the Audio Base.
Ensure the subwoofer is turned on. Turn the subwoofer power
switch to ON.
Press the WIRELESS LINK button on the back of the subwoofer to
re-link the subwoofer with the Audio Base.
®
The device is out of the 33ft (10m) communication range. Bring
the Bluetooth
Remove any obstacles between the main unit and the device.
Other devices that use the 2.4GHz frequency band, like a wireless
router, microwave, cordless phone, etc. may interfere.
Bring the Bluetooth
from the other devices.
Check the following:
The batteries are inserted correctly.
The batteries are new.
The remote control is pointed directly at the remote sensor of the
unit.
The remote control is not being used from too far a distance from
the unit.
Nothing is obstructing remote sensor (located on front of the unit).
Keep the device close to the system until the device vibrates.
Check the NFC function of the device is set to on.
button of the Audio Base.
® device closer to the main unit.
® device closer to the main unit and distance it
2014/2/28 17:08:49