2-Port Hybrid Expansion Card (Kx-Tvm502) - Panasonic KX-TVM50 Installation Manual

2.7 Installing Optional Cards—KX-TVM50
2.7.1

2-Port Hybrid Expansion Card (KX-TVM502)

Each KX-TVM502 adds 2 ports to the VPS which can be used for DPT, APT, Inband, or No
Integration. KX-TVM502 cards can be installed in slots 2 and 3 of the VPS.
Integration Type
DPT Integration
APT Integration
Inband/No
Integration
* When using DPT Integration, only odd numbered jacks (1, 3, and 5) can be used. Each jack
provides 2 VPS ports.
Included Items
Screws × 2
Installation
1.
Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place,
lower the other end of the card so that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
Extension Bolt
48 Installation Manual
Basic Configuration
No. of Useable
Jacks*
1
2
2
1
2
Maximum Configuration
No. of Useable
No. of Ports
Jacks*
2 3 (1 per card)
2
2
KX-TVM502 x 2
No. of Ports
6
6 6
6 6