Panasonic KX-TVM50 Installation Manual page 76

2.15 Wall Mounting
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork
(metal/wire laths, etc.), conduits, or electrical cables buried in the wall.
1.
Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the
locations where the 2 screws need to be placed.
KX-TVM50
2.
Install 2 anchor plugs (user-supplied) in the wall.
Hammer
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
76 Installation Manual
83 mm
Anchor Plug
6.4 mm
29 mm
KX-TVM200
110 mm