Table of Contents
Advertisement
Settings
Device
Setting
BPU4000
Image format settings
Video output connector
settings
CA4000
Prompter output
connector settings
HD CUTOUT Video System
An HD signal can be extracted from the 4K signal by installing
the optional SZC-2001 (HD CUTOUT software) in the
BPU4000.
The region that is cut out can be controlled using a mouse or
other device connected to the HD CUTOUT Controller.
For details about setup and operation, refer to the manual
supplied with the SZC-2001.
The cut-out HD signal is output from SLOT1 and a 4K signal
can also be output simultaneously from SLOT2.
HD signals down-converted from the 4K signal can be output
from SLOT3, SLOT4, and the CCU.
Also, a wire frame indicating the cut-out region can be
displayed on the signal from SLOT3.
14
Connection and Setup
Menu/Page
CONFIGURATION/
<OUTPUT FORMAT>
CONFIGURATION/
<OUTPUT FORMAT>
Can also be set using the control panel.
MAINTENANCE/<SDI OUT>
Item
SYSTEM
RESOLUTION
FORMAT
FREQUENCY
SLOT1 to
SLOT4
SDI-MONI OUT
Set value
4096×2160 (4K system)
1920×1080 (HD HFR
system)
Frame frequency
Video output format of each
slot
HD-PROMPT
Hide quick links:
Advertisement
Table of Contents
