Hfr Video System - Sony BPU4000 Operation Manual

HFR Video System

The BPU4000 can transfer HFR video and perform signal
processing for the following formats according to the
connected camera.
HFR format
1)
1080/59.94P (2×)
1)
1080/50P (2×)
2)
720/59.94P (2×)
2)
720/50P (2×)
1)
1080/59.94P (3×)
1)
1080/50P (3×)
2)
720/59.94P (3×)
2)
720/50P (3×)
1)
1080/59.94P (4×)
1)
1080/50P (4×)
2)
720/59.94P (4×)
2)
720/50P (4×)
1)
1080/59.94P (6×)
1)
1080/50P (6×)
2)
720/59.94P (6×)
2)
720/50P (6×)
1)
1080/59.94P (8×)
1)
1080/50P (8×)
2)
720/59.94P (8×)
2)
720/50P (8×)
4096×2160/59.94P (2×)
4096×2160/50P (2×)
1) Interlaced output also supported in HD HFR 1080 format
2) Selectable only when the format is set to 720P by the camera control unit (such as the HDCU2000).
A 1× frame rate signal can be output at the same time from
SLOT3, SLOT4, and the CCU.
Note
The HFR imaging function is dependent on the software
version of the connected camera and camera adaptor. Check
the compatibility of each device before use.
16
Connection and Setup
Connected device
Without option SZC-2002 series installed
HDC4300 PMW-F55
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No No
No No
No No
No No
No No
No No
Optional SZC-4002/4002M/4002W software must be installed
to support formats other than 2× and 3× HD.
SZC-4002 series installed
F65 PMW-F55
No No
No No
No No
No No
No No
No No
No No
No No
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No No
No No
No No
No No
Yes No
Yes No
Yes: Supported, No: Not supported
F65 HDC4300
No No
No No
No No
No No
No No
No No
No No
No No
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
Yes No
Yes No