Sony BPU4000 Operation Manual page 31

Page name Item
Page No.
<OTHERS> ASSIGNABLE
SWITCH
C11
HD DOWNCONV
FILTER
CHARACTER LEVEL
2× MODE (HD)
CLEAR BPU
SETTINGS
FLICKER
REDUCTION
CCU TRANSMIT
<OPTION KEY> READ (USBtCAM)
C12
INSTALLED OPTION
<HD CUTOUT> HD CUTOUT
C13
MODE
CUTOUT POSITION
CAMERA TILT
CAMERA ROLL
FOCAL LENGTH
DIAGNOSIS menu
Page name Item
Page No.
<OPTICAL LEVEL> OPTICAL LEVEL
D01
CABLE LENGTH
Set value
OFF, BPU BARS
1 to 4
1 to 5
0 (SRMASTER), 1 (EVS)
ENTER to execute
MODE1, MODE2, ---
HIGH BIT RATE, HD-SDI
ENTER to execute
OFF, ON
SIMPLE HD,
ZOOM-PERSPECTIVE
CH 1, 2
CENTER H –2048 to +2047, 0
CENTER V –1080 to +1079, 0
ZOOM 1.0 to 4.0, 2.0
–45.0 to +45.0, 0
–5.0 to +5.0, 0
7 to 500, ∞
Set value
Bar graph display
x.x km
Meaning
Assignable button function select
4K video signal to HD signal down-converter filter
type
Menu character contrast level
Selects the output mode for 2× HD video (SLOT3).
0 (SRMASTER): Output aligned with
horseshoe-shaped field (compatible with the
SR-R1000).
1 (EVS): Output aligned with field (compatible with
servers manufactured by EVS).
Displayed only when CURRENT in <CHU MODE>
(C08) is set to F65(2×).
Reset to factory default settings
MODE1: Enable when the full screen is flickering.
MODE2: Enable when there is localized flickering.
---: Displayed for all formats other than HD HFR.
Sets the type of CCU connected.
HIGH BIT RATE: CCU that support high bit rate.
HD-SDI: CCU that does not support high bit rate.
CCUs with 1.5 Gbps optical transmission are not
supported.
Read the install key from a USB flash drive.
List of installed options (display only)
HD CUTOUT function on/off setting (available only
when the SZC-2001 is installed)
HD CUTOUT mode selection
SIMPLE HD: HD image cut out as-is from 4K image.
ZOOM-PERSPECTIVE: When HD image is cut out
from 4K image, distortion is corrected. Zoom in/out is
supported.
Specify the cut-out frame to control.
Center position of cut-out frame (H)
Center position of cut-out frame (V)
Zoom factor
Camera tilt angle
Camera roll angle
Lens focal length (2.8× lens focal length when
LA-FZB2 is connected).
∞: Equivalent to simple CUTOUT with zoom
Meaning
Bar graph display of optical signal level condition
between the unit and the CCU.
Length of the optical fiber cable between the CCU
and camera head
31
Menu Settings