Dell PowerEdge M420 Owner's Manual page 103

Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Error Code Message Information
SEL0006
SEL0008
SEL0010
SEL0012
SEL1204
SEL1209
SEL1211
SEL1300
Downloaded from
www.Manualslib.com
Message
All event logging is disabled.
Details
This message is displayed when all event logging has been disabled by the user.
Action
If unintended, re-enable logging.
Message Log is full.
Details
When the event log is full, additional events are not written to the log. Older events may be
overwritten and lost. This message may also appear if the user disabled event logging.
Action
Backup and clear log.
Message Log is almost full.
Details
When the event log is full, additional events are not written to the log. Older events may be
overwritten and lost.
Action
Backup and clear log at the next maintained time.
Message Could not create or initialize the system event log.
Details
If the system event log fails to initialize, platform status and failure events are not captured.
Some management software do not report platform exceptions.
Action
Reboot the management controller or iDRAC. Cycle system input power. If problem persists
call support.
Message
An unknown system hardware failure detected.
LCD Message Unknown system hardware failure.
Details
If the system event log failed to initialize platform status and failure events are not
captured. Some management software will not report platform exceptions.
Action
Re-configure system to minimum supported configuration. If issues persists, contact
support.
Message The platform event filter action failed.
Details
System policies or permissions may prevent the action from executing. If configured, the
system does not execute the action on a platform event (such as power down, cycle,
interrupt, and send alert).
Action
Review platform event configuration.
Message
The time-stamp clock could not be synchronized.
Details
The time stamp on system event log events may not correlate to the system time.
Action
Cycle system input power. If problem persists, contact support.
Message No bootable media found.
manuals search engine
103

Advertisement

Table of Contents
loading

Table of Contents