Dell PowerEdge M420 Owner's Manual page 113

Error Code Message Information
VLT0208
VLT0209
VLT0210
VLT0212
Downloaded from www.Manualslib.com
Message The memory module <
threshold.
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The memory module <
threshold.
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The memory module <
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The disk drive bay <
LCD Message The disk drive bay <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
manuals search engine
number > < name > voltage is greater than the upper warning
number > < name > voltage is outside of range.
Getting Help.
number > < name > voltage is greater than the upper critical
number > < name > voltage is outside of range.
Getting Help.
number > < name > voltage is outside of range.
number > < name > voltage is outside of range.
Getting Help.
name > voltage is less than the lower warning threshold.
name > voltage is outside of range.
113