Figure 1-14 Pole Mounting The Dome Camera - Motorola MOTOMESH 1.2 Setup And Configuration Manual

B.) Attach the assembly to the pole using stainless steel straps.
C.) Remove coupling from the housing and attach to the gooseneck wall mount.
D.) Follow camera mounting procedure to mount onto the dome, located in the Outdoor and
E.) Route the cables through the gooseneck, through the pole mount adaptor access holes.
F.) Attach the camera dome assembly then push and twist.
G.) Reattach the three (3) holding bolts to coupling and neck.
H.) Complete installation by attaching the lower dome cover.

Figure 1-14 Pole Mounting the Dome Camera

3. Attach the Antenna at the site. (Install appropriate weather-proofing at this time as needed.)
6881011Y68-B October 2006
MOTOMESH 1.2 Mesh Camera System Setup and Configuration Guide
Indoor Dome Housings hard copy or in PDF file (Dome Housing Installation.pdf).
1-13