Figure 1-15 Example Of Gooseneck Component Setup In The Field; Figure 1-16 Example Of Deployed Pelco Power Supply - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Chapter 1: Overview
Figure 1-15
4. Connect the AC power source to the power supply (hardwire).
TIP FROM THE FIELD: Listen for the camera PTZ motor to activate. You will hear the
camera spin to its 'Home' location (zero degrees). This tells you that at least the power is working
with the camera.
Figure 1-16
5. Have someone at the MiSC location (and possibly a Mesh MEA connected user, if one is setup
and available), try to access the camera and test.
6881011Y68-B October 2006
Example of Gooseneck Component Setup in the Field
Example of Deployed PELCO Power Supply
1-14